{"title":"Silicone Molds","description":"","products":[{"product_id":"silicone-mold-for-resin-musubi-bits-approx-3-4-in-x-1-8-in-thick-to-make-cabochan-phone-charm-gift-shaved-ice-shaved-ice-snowcone","title":"SILICONE MOLD for resin, musubi bits. Approx 3\/4 in x 1\/8 in thick. To make cabochan, phone charm, gift. shaved ice. shaved ice. snowcone","description":"\u003cp\u003eThis listing is for a SILICONE MOLD for resin, \u003cbr\u003e\ndesign: musubi x 2 (pair)\u003cbr\u003e\nApprox 3\/4 inch wide x 3\/4 inch tall x 1\/8 inch thick.\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249903698055,"sku":null,"price":4.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249903730823,"sku":null,"price":4.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.7080606425_gqsx.jpg?v=1759088981"},{"product_id":"silicone-mold-for-resin-lucky-cat-maneki-neko-shaker-or-flat-mold-to-make-keychain-or-badge-reel-gift-for-friend-sister-grandma-mom","title":"SILICONE MOLD for resin, lucky cat, maneki neko, shaker or flat mold, to make keychain or badge reel, gift for friend, sister, grandma, mom","description":"\u003cp\u003eThis listing is for SILICONE *SHAKER* MOLD or FLAT MOLD for resin. \u003cbr\u003e\nDesign: maneki neko \/ lucky cat\u003c\/p\u003e\n\n\u003cp\u003eSize: \u003cbr\u003e\n   - 2 inch SHAKER mold (keychain size)\u003cbr\u003e\n   - 1.75 inch FLAT mold (badge reel)\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent \/ 2 inch SHAKER","offer_id":43249903861895,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true},{"title":"translucent \/ 1.75 inch FLAT","offer_id":43249903894663,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true},{"title":"random color \/ 2 inch SHAKER","offer_id":43249903927431,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true},{"title":"random color \/ 1.75 inch FLAT","offer_id":43249903960199,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5739318797_9lfh.jpg?v=1759088990"},{"product_id":"silicone-mold-for-resin-moon-with-candycorn-handpoured-handmade-gift-for-crafter-resin-artist","title":"SILICONE MOLD for resin, moon with candycorn. Handpoured. Handmade gift for crafter, resin artist","description":"\u003cp\u003eThis listing is for a SILICONE MOLD for resin. \u003cbr\u003e\ndesign: moon with candycorn\u003cbr\u003e\nsize: approx 1.5 inch \u003cbr\u003e\nGift for crafter, resin artist\u003cbr\u003e\n*Check out my other silicone mold designs!\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249904484487,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249904517255,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6288433833_36sa.jpg?v=1759088997"},{"product_id":"silicone-shaker-mold-for-resin-hibiscus-shaker-mold-1-5-inches","title":"SILICONE SHAKER MOLD for resin, hibiscus shaker mold, 1.5 inches","description":"\u003cp\u003eThis listing is for SILICONE SHAKER MOLD for resin. \u003cbr\u003e\nDesign: hibiscus flower\u003cbr\u003e\nSize: approx 1.5 in tall \u003cbr\u003e\nTo make gift for nurse, friend, coffee lover \u003cbr\u003e\nTo make keychain, badge reel, or magnet\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"transluscent","offer_id":43249904746631,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249904779399,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5309270709_igqi.jpg?v=1759088999"},{"product_id":"silicone-mold-for-resin-cracked-egg-baby-approx-1-25-x-1-in-mold-to-make-keychain-badge-reel-magnet-gift-for-nurse-teacher","title":"SILICONE MOLD for resin, cracked egg baby, approx 1.25 x 1 in, mold to make keychain badge reel magnet, gift for nurse teacher","description":"\u003cp\u003eThis listing is for SILICONE MOLD for resin. \u003cbr\u003e\nDesign: flat cracked egg baby character\u003cbr\u003e\nSize: approx 1.25 in x 1 in \u003cbr\u003e\nTo make gift for nurse, friend, neighbor \u003cbr\u003e\nTo make keychain, badge reel, or magnet\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249904812167,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249904844935,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5230849767_9j9w.jpg?v=1759089000"},{"product_id":"silicone-mold-for-resin-cupcake-with-ladybug-flower-springtime-dessert-mold-to-make-keychain-badge-reel-magnet-gift-for-nurse-teacher","title":"SILICONE MOLD for resin, cupcake with ladybug flower, springtime dessert, mold to make keychain badge reel magnet, gift for nurse teacher","description":"\u003cp\u003eThis listing is for SILICONE MOLD for resin. \u003cbr\u003e\nDesign: flat cupcake with lady bug and flower\u003cbr\u003e\nSize: approx 2 in x 1.5 in\u003cbr\u003e\nTo make gift for nurse, friend, neighbor \u003cbr\u003e\nTo make keychain, badge reel, or magnet\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249904877703,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249904910471,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5182617840_1y3y.jpg?v=1759089001"},{"product_id":"silicone-mold-for-resin-kitchen-conversions-chart-kitchen-measurement-chart-cups-and-spoons-home-decor-gift-for-baker-gift-for-mom","title":"SILICONE MOLD for resin, kitchen conversions chart, kitchen measurement chart, cups and spoons, home decor, gift for baker, gift for mom","description":"\u003cp\u003eThis listing is for a 5 x 5 inch kitchen conversions chart, measurement conversions, home decor\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249905172615,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249905205383,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5333433643_r60e.jpg?v=1759089006"},{"product_id":"glow-in-the-dark-ghost-dry-shaker-s-cup-topper-only-20-30-ounce-halloween-spooky-season","title":"Glow in the dark ghost dry shaker S cup topper only. 20\/30 ounce. Halloween. Spooky season.","description":"\u003cp\u003eWelcome to Buddha Buddies Designs!\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for 1 glow in the dark ghost DRY shaker cup topper only for STAN  LEY 20\/30 ounce.\u003c\/p\u003e \n\n\u003cp\u003ePLEASE READ\u003c\/p\u003e\n\n\u003cp\u003e1. IMPORTANT DISCLAIMERS:\u003cbr\u003e\nA) To clean, use a lint-free cloth only to prevent scratches or damaging the resin finish.  Do not clean with any chemicals such as alcohol, acetone, disinfecting wipes (purple\/Saniwipes) as this can ruin the resin finish. Do not leave your resin piece soaking in water or chemicals. \u003cbr\u003e\nB) All epoxy\/resin eventually yellows over time from the sun and heat. Prolonged exposure to heat and sunlight will weaken your piece and should be avoided. Excessive heat can cause the resin to become bendy\/flimsy. \u003cbr\u003e\nC) All resin charms, keychains, badge reels, magnets and bookmarks are not indestructible. Resin may crack or chip with enough force or if dropped.  I do not offer repairs or refunds for this happening. \u003cbr\u003e\nD) If your piece is a shaker style, it is filled with baby oil (unless it is a dry shaker).  If the piece is dropped, banged or excessive force is applied especially to the oil filled part, it can break\/\/leak. I do not offer repairs or refunds for this happening. \u003cbr\u003e\nE) May contain small parts. Not suitable for children\u003cbr\u003e\nF) Badge reels are made to accommodate 2 oz of weight or less (1-2 badge reels). Placing multiple badge reels, keys, pens, etc on a badge reel may prevent the reel from properly retracting.  Buddha Buddies Designs is not responsible for common wear and tear damage. \u003cbr\u003e\nG) The typical badge reel lifespan is 3-4 months. You can opt to have your piece adhered to the badge reel with 3 dual lock velcro to swap out (interchange) the badge reel when the reel needs to be replaced (send a message or note to seller upon purchase).\u003c\/p\u003e \n\n\u003cp\u003e2. HANDMADE. All items are HANDMADE and may have some minor aesthetic flaws.  I work very hard to make sure that my items leave here as perfect as possible. No two items will be 100% identical. You may find a couple tiny bubbles or a piece of dust or glitter in your resined pieces. By purchasing these pieces, you agree that these \"flaws\" are acceptable. However, I will not mail things that I am not happy sending.\u003c\/p\u003e\n\n\u003cp\u003e3.  TIME NEEDED TO CREATE YOUR ORDER.  Ready-To-Ship items will be mailed within 3 business days. Made-To-Order items generally take 7-10 business days to create and ship from time of payment.  This does not include shipping time once your order is dropped off to the post office. *Times may be extended for large orders or during peak seasons.\u003c\/p\u003e \n\n\u003cp\u003e4. PHOTOS\/EXAMPLES. Photos are for reference only. Please note that colors may vary slightly due to computer display.\u003c\/p\u003e\n\n\u003cp\u003e5. NO REFUNDS. There are NO REFUNDS due to the items being handmade\/customized and\/or personalized\/seasonal unless there is an error on my part.\u003c\/p\u003e\n\n\u003cp\u003e6. NO CANCELLATIONS after 24 hrs.  Once I start on your piece, changes cannot be made to an order.\u003c\/p\u003e\n\n\u003cp\u003e7. ADDRESS  Please make sure your SHIPPING ADDRESS is correct BEFORE check out. Once the shipping label is printed\/paid, I cannot change it unless you pay for a new shipping label.\u003c\/p\u003e\n\n\u003cp\u003e8. SHIPPING:  Shipping is via USPS and customers are responsible for shipping charges unless the minimum order for free shipping is met before taxes. Items are carefully packaged before transit.  Once an item has been shipped, I am not responsible for lost or damaged items.\u003c\/p\u003e\n\n\u003cp\u003e9. I am passionate about making the best pieces I hand make and want every customer to be satisfied. If something is not to your satisfaction, message me before making a claim with Etsy or leaving a poor review. But if you love your piece(s), please leave me a review reflecting that.  It means the world to makers when we get feedback 😊\u003c\/p\u003e\n\n\u003cp\u003eThank you for visiting my shop! If you have any questions please feel free to message me and I will get back to you within 48 hours ❤️.\u003c\/p\u003e \n\n\u003cp\u003eThank you and have a great day!\u003cbr\u003e\nBuddha Buddies Design\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":43249905434759,"sku":null,"price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6214730108_jnk0.jpg?v=1759089026"},{"product_id":"silicone-mold-for-resin-s-cup-topper-mold-to-make-layered-sakura-cherry-blossom-cup-topper-40-oz","title":"SILICONE MOLD for resin. S cup topper mold to make layered sakura \/ cherry blossom cup topper 40 oz","description":"\u003cp\u003eThis is a SILICONE MOLD for resin. S cup topper silicone mold.  mold to make a layered Sakura \/ cherry blossom cup topper\u003c\/p\u003e\n\n\u003cp\u003eFits a cup 20\/30 OR 40 ounces for S.tan.ley\u003cbr\u003e\nMeasure your cup to ensure these will fit. We do not offer refunds or exchanges for wrong size\u003c\/p\u003e \n\n\u003cp\u003eGift for mom, dad, sister, nurse, teacher\u003c\/p\u003e\n\n\u003cp\u003eSize: \u003cbr\u003e\n   - fits 40 ounce cups\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent \/ 30 oz S topper mold","offer_id":43249905467527,"sku":null,"price":15.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ 40 oz S cup mold","offer_id":43249905500295,"sku":null,"price":15.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ 30 oz S topper mold","offer_id":43249905533063,"sku":null,"price":15.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ 40 oz S cup mold","offer_id":43249905565831,"sku":null,"price":15.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6563922944_ny0i.jpg?v=1759089031"},{"product_id":"silicone-mold-for-resin-cat-coaster-4-inches-intertwined-cat-love-heart-tail-design-sweetheart-cats-mold-gift-for-cat-lover-cat-mom","title":"SILICONE MOLD for resin, cat coaster, 4 inches. Intertwined Cat Love - Heart Tail Design. Sweetheart Cats Mold. Gift for cat lover, cat mom","description":"\u003cp\u003eThis listing is for a SILICONE MOLD for resin, of two adorable cat silhouettes sitting side by side, with their tails intertwined to form a heart. \u003cbr\u003e\ndesign: two cats 4 inch coaster\u003c\/p\u003e \n\n\u003cp\u003eFeatures:\u003cbr\u003e\nSweetheart Design: Features two cats sitting side by side with their tails forming a heart.\u003cbr\u003e\nHigh-Quality Silicone: Flexible and durable, allowing for easy release of your creations.\u003cbr\u003e\nVersatile Use: Ideal for resin casting and other crafting projects.\u003c\/p\u003e\n\n\u003cp\u003eGift Suggestion: This Sweetheart Cats silicone mold makes a fantastic gift for any resin artist, crafter, or cat lover! It's also a perfect gift for couples, friends, or anyone who appreciates romantic and heartwarming designs.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e\n\n\u003cp\u003eCat Lover Silicone Mold\u003cbr\u003e\nCouple Cats Mold\u003cbr\u003e\nTwo Cats Mold\u003cbr\u003e\nRomantic Cats Mold\u003cbr\u003e\nHeart Cats Mold\u003cbr\u003e\nResin Cat Mold\u003cbr\u003e\nSilicone Cat Mold\u003cbr\u003e\nAnimal Mold\u003cbr\u003e\nResin Crafts\u003cbr\u003e\nSilicone Mold\u003cbr\u003e\nAnimal Mold\u003cbr\u003e\nHome Decor\u003cbr\u003e\nResin Art\u003cbr\u003e\nCat Lovers\u003cbr\u003e\nKitten Lovers\u003cbr\u003e\nCat Gifts\u003cbr\u003e\nResin Casting\u003cbr\u003e\nCrafting Supplies\u003cbr\u003e\nValentine's Day Mold\u003cbr\u003e\nRomantic Gifts\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249905598599,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249905631367,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6602949399_ogii.jpg?v=1759089030"},{"product_id":"silicone-mold-for-resin-musubi-shaker-and-flat-mold-palette-to-make-keychain-approximately-2-inch-gift-for-musubi-lover-foodie","title":"SILICONE MOLD for resin, musubi shaker AND flat mold palette to make keychain, approximately 2 inch, gift for musubi lover, foodie","description":"\u003cp\u003eThis is an EXCLUSIVE \/ CUSTOM DESIGN for Buddha Buddies Designs! \u003cbr\u003e\nThis listing is for SILICONE *SHAKER AND FLAT PALETTE* MOLD for resin. \u003cbr\u003e\n**silicone mold only.  casted piece to show example of finished pieces**\u003c\/p\u003e \n\n\u003cp\u003eDesign: musubi SHAKER and FLAT mold palette\u003cbr\u003e\nSize: \u003cbr\u003e\n   - flat approximately 2 inch wide\u003cbr\u003e\n   - shaker approx 2.5 inch wide\u003cbr\u003e\n   - bits approx 0.5 inch wide \u003cbr\u003e\n  \u003cbr\u003e\nmusubi SHAKER and FLAT silicone mold palette to make keychain, approximately 2 inch, gift for slushie lover, foodie\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249905664135,"sku":null,"price":24.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249905696903,"sku":null,"price":24.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5956486184_ew1c.jpg?v=1759089029"},{"product_id":"silicone-mold-for-resin-slushie-shaker-and-flat-mold-palette-to-make-keychain-approximately-2-inch-gift-for-slushie-lover-foodie","title":"SILICONE MOLD for resin, slushie shaker AND flat mold palette to make keychain, approximately 2 inch, gift for slushie lover, foodie","description":"\u003cp\u003eThis is an EXCLUSIVE \/ CUSTOM DESIGN for Buddha Buddies Designs! \u003cbr\u003e\nThis listing is for SILICONE *SHAKER AND FLAT PALETTE* MOLD for resin. \u003cbr\u003e\n**silicone mold only.  casted piece to show example of finished pieces**\u003c\/p\u003e \n\n\u003cp\u003eDesign:  slushie SHAKER and FLAT mold palette\u003cbr\u003e\nSize: \u003cbr\u003e\n   - approximately 2 inch\u003cbr\u003e\n  \u003cbr\u003e\nslushie SHAKER and FLAT silicone mold palette to make keychain, approximately 2 inch, gift for slushie lover, foodie\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249905729671,"sku":null,"price":23.99,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249905762439,"sku":null,"price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6004551601_7vgx.jpg?v=1759089031"},{"product_id":"silicone-mold-for-resin-flat-jeweled-perfume-bottle-design-2-x-1-5-in-mold-to-make-keychain-or-badge-reel-gift-for-nurse-or-teacher","title":"SILICONE MOLD for resin, flat jeweled  perfume bottle design, 2 x 1.5 in, mold to make keychain or badge reel, gift for nurse or teacher","description":"\u003cp\u003eThis listing is for SILICONE MOLD for resin. \u003cbr\u003e\nDesign: flat jeweled perfume bottle design\u003cbr\u003e\nSize: 2 in wide x 1.5 in tall\u003cbr\u003e\nTo make gift for nurse or friend\u003cbr\u003e\nTo make keychain, badge reel, or magnet\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249905860743,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249905893511,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5230795105_taod.jpg?v=1759089038"},{"product_id":"silicone-mold-for-resin-shaker-mold-for-jeweled-heart-design-2-x-1-75-in-mold-to-make-keychain-or-badge-reel-gift-for-nurse-or-teacher","title":"SILICONE MOLD for resin, SHAKER mold for jeweled  heart design, 2 x 1.75 in, mold to make keychain or badge reel, gift for nurse or teacher","description":"\u003cp\u003eThis listing is for SILICONE *SHAKER* MOLD for resin. \u003cbr\u003e\nDesign: flat jeweled heart design\u003cbr\u003e\nSize: 2 in wide x 1.75 in tall\u003cbr\u003e\nTo make gift for nurse or friend\u003cbr\u003e\nTo make keychain, badge reel, or magnet\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249905926279,"sku":null,"price":13.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249905959047,"sku":null,"price":13.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5182510090_h50k.jpg?v=1759089039"},{"product_id":"silicone-mold-for-resin-popcorn-shaker-and-flat-mold-palette-to-make-keychain-approximately-2-inch-gift-for-popcorn-lover-foodie","title":"SILICONE MOLD for resin, popcorn shaker AND flat mold palette to make keychain, approximately 2 inch, gift for popcorn lover, foodie","description":"\u003cp\u003eThis is an EXCLUSIVE \/ CUSTOM DESIGN for Buddha Buddies Designs! \u003cbr\u003e\nThis listing is for SILICONE *SHAKER AND FLAT PALETTE* MOLD for resin. \u003cbr\u003e\n**silicone mold only.  casted pieces to show example of finished pieces**\u003c\/p\u003e \n\n \u003cp\u003eDesign:  Hawaiian popcorn SHAKER and FLAT mold palette\u003cbr\u003e\nSize: \u003cbr\u003e\n   - approximately 2 inch\u003cbr\u003e\n   - popcorn bits for you to fill shaker cavity with \u003cbr\u003e\nHawaiian popcorn SHAKER and FLAT silicone mold palette to make keychain, approximately 2 inch, gift for popcorn lover, foodie\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249906647175,"sku":null,"price":24.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249906679943,"sku":null,"price":24.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5956471990_ccxe.jpg?v=1759089098"},{"product_id":"silicone-mold-for-resin-flat-mold-for-jeweled-heart-design-2-x-1-75-in-mold-to-make-keychain-or-badge-reel-gift-for-nurse-or-teacher","title":"SILICONE MOLD for resin, FLAT mold for jeweled  heart design, 2 x 1.75 in, mold to make keychain or badge reel, gift for nurse or teacher","description":"\u003cp\u003eThis listing is for SILICONE *FLAT* MOLD for resin. \u003cbr\u003e\nDesign: flat jeweled heart design\u003cbr\u003e\nSize: 2 in wide x 1.75 in tall\u003cbr\u003e\nTo make gift for nurse or friend\u003cbr\u003e\nTo make keychain, badge reel, or magnet\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249908842631,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249908875399,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5182578690_8x5m.jpg?v=1759089129"},{"product_id":"silicone-shaker-mold-for-resin-chinese-zodiac-animal-silicone-mold-chinese-new-year-lunar-new-year-1-75-shaker-mold","title":"silicone SHAKER mold for resin, chinese zodiac animal silicone mold, chinese new year, lunar new year. 1.75\" shaker mold","description":"\u003cp\u003eThis 1.75 inch shaker silicone mold features your choice of the 12 Chinese zodiac animals \u003cbr\u003e\nThe character\/design in the mold measures approximately 1.5 inches\u003c\/p\u003e\n\n\u003cp\u003e* The photos may show an acrylic blank(s) to show the detail of the mold design.\u003cbr\u003e\n* You may order them individually or get get them bundled for a discount. \u003cbr\u003e\n   * If all 12 ordered, individual molds will be made for each animal (not a palette of 12).\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent \/ rat","offer_id":43249909268615,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ ox","offer_id":43249909301383,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ tiger","offer_id":43249909334151,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ rabbit","offer_id":43249909366919,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ dragon","offer_id":43249909399687,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ snake","offer_id":43249909432455,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ horse","offer_id":43249909465223,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ goat","offer_id":43249909497991,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ monkey","offer_id":43249909530759,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ rooster","offer_id":43249909563527,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ dog","offer_id":43249909596295,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ pig","offer_id":43249909629063,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ all 12 zodiac animal","offer_id":43249909661831,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ rat","offer_id":43249909694599,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ ox","offer_id":43249909727367,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ tiger","offer_id":43249909760135,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ rabbit","offer_id":43249909792903,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ dragon","offer_id":43249909825671,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ snake","offer_id":43249909858439,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ horse","offer_id":43249909891207,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ goat","offer_id":43249909923975,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ monkey","offer_id":43249909956743,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ rooster","offer_id":43249909989511,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ dog","offer_id":43249910022279,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ pig","offer_id":43249910055047,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ all 12 zodiac animal","offer_id":43249910087815,"sku":null,"price":12.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5103013062_oyye.jpg?v=1759089134"},{"product_id":"silicone-mold-for-resin-cat-with-books-approx-1-75-inch-tall-x-1-25-inch-wide-x-1-8-inch-thick-gift-for-book-lover-teacher-librarian","title":"SILICONE MOLD for resin, cat with books. Approx 1.75 inch tall x 1.25 inch wide x 1\/8 inch thick. gift for book lover, teacher, librarian","description":"\u003cp\u003eThis listing is for a SILICONE MOLD for resin, \u003cbr\u003e\ndesign: cat with books. \u003cbr\u003e\nApprox 1.75 inch tall x 1.25 inch wide x 1\/8 inch thick. \u003cbr\u003e\ngift for book lover, teacher, librarian\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249910120583,"sku":null,"price":10.99,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249910153351,"sku":null,"price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6943541992_5uj9.jpg?v=1759089135"},{"product_id":"silicone-mold-for-resin-dragon-with-books-approx-1-75-inch-tall-x-1-25-inch-wide-x-1-8-inch-thick-gift-for-book-lover-teacher-librarian","title":"SILICONE MOLD for resin, dragon with books. Approx 1.75 inch tall x 1.25 inch wide x 1\/8 inch thick. gift for book lover, teacher, librarian","description":"\u003cp\u003eThis listing is for a SILICONE MOLD for resin, \u003cbr\u003e\ndesign: dragon with books. \u003cbr\u003e\nApprox 1.75 inch tall x 1.25 inch wide x 1\/8 inch thick. \u003cbr\u003e\ngift for book lover, teacher, librarian\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249910186119,"sku":null,"price":10.99,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249910218887,"sku":null,"price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6943542986_qbga.jpg?v=1759089138"},{"product_id":"silicone-mold-for-resin-cherry-skull-bow-earrings-approx-1-5-inch-tall-x-1-5-inch-wide-x-1-8-inch-thick-gift-for-sister-daughter-friend","title":"SILICONE MOLD for resin, cherry skull bow earrings. Approx 1.5 inch tall x 1.5 inch wide x 1\/8 inch thick. gift for sister, daughter, friend","description":"\u003cp\u003eThis listing is for a SILICONE MOLD for resin, \u003cbr\u003e\ndesign: cherry skull bow earrings. \u003cbr\u003e\nApprox 1.5 inch tall x 1.5 inch wide x 1\/8 inch thick. \u003cbr\u003e\ngift for sister, friend, daughter\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249910251655,"sku":null,"price":11.99,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249910284423,"sku":null,"price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5746275293_6y8k.jpg?v=1759089137"},{"product_id":"silicone-mold-for-resin-cute-bear-handpoured-handmade-gift-for-crafter-resin-artist","title":"SILICONE MOLD for resin, cute bear. Handpoured. Handmade gift for crafter, resin artist","description":"\u003cp\u003eThis listing is for a SILICONE MOLD for resin. \u003cbr\u003e\ndesign: cute bear \u003cbr\u003e\nsizes: \u003cbr\u003e\napprox 2 inch tall \/ 1.3 inch wide\u003cbr\u003e\nGift for crafter, resin artist\u003cbr\u003e\n*Check out my other silicone mold designs!\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249910612103,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249910644871,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6234541126_nyvg.jpg?v=1759089145"},{"product_id":"silicone-mold-for-resin-mooncake-shaker-mold-2-styles-to-make-keychain-chinese-new-year-lunar-new-year-gift-for-grandma-mom-dad","title":"SILICONE MOLD for resin, mooncake shaker mold -2 styles to make keychain, chinese new year, lunar new year, gift for grandma, mom, dad","description":"\u003cp\u003eThis is an EXCLUSIVE \/ CUSTOM DESIGN for Buddha Buddies Designs! \u003cbr\u003e\nThis listing is for SILICONE *SHAKER* MOLD for resin. \u003cbr\u003e\nDesign: x2 mooncake designs\u003c\/p\u003e \n\n\u003cp\u003eSize: \u003cbr\u003e\n   - mooncake measures approximately 1.75 inch\u003cbr\u003e\nSilicone mold to make keychain \u003cbr\u003e\nGift for chinese new year. fire\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249910710407,"sku":null,"price":25.25,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249910743175,"sku":null,"price":25.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5752688073_p5g3.jpg?v=1759089143"},{"product_id":"silicone-mold-for-resin-witch-frog-halloween-spooky-season-2-inches-gift-for-nurse-gift-for-teacher","title":"SILICONE MOLD for resin, witch frog, halloween, spooky season, 2 inches, gift for nurse, gift for teacher","description":"\u003cp\u003eThis listing is for a 2 inch halloween witch frog silicone mold\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249910775943,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249910808711,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5204794233_q44t.jpg?v=1759089150"},{"product_id":"silicone-mold-for-resin-bow-shaped-earrings-approx-1-inch-tall-x-1-5-inch-wide-x-1-8-inch-thick-gift-for-sister-daughter-mother-friend","title":"SILICONE MOLD for resin, bow shaped earrings. Approx 1 inch tall x 1.5 inch wide x 1\/8 inch thick. gift for sister, daughter, mother, friend","description":"\u003cp\u003eThis listing is for a SILICONE MOLD for resin, \u003cbr\u003e\nbow shaped earrings. \u003cbr\u003e\nApprox 1 inch tall x 1.5 inch wide x 1\/8 inch thick. \u003cbr\u003e\ngift for sister, mother, friend, daughter teacher\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249911890055,"sku":null,"price":13.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249911922823,"sku":null,"price":13.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5698164110_gyic.jpg?v=1759089155"},{"product_id":"silicone-mold-for-resin-coffee-pot-shaker-mold-to-make-keychain-or-badge-reel-gift-for-coffee-lover-nurse-teacher-exclusive-shop-design","title":"SILICONE MOLD for resin, coffee pot SHAKER mold to make keychain or badge reel, gift for coffee lover, nurse, teacher. Exclusive shop design","description":"\u003cp\u003eThis listing is for SILICONE *SHAKER* MOLD for resin. \u003cbr\u003e\nExclusive shop design!\u003cbr\u003e\nDesign: coffee pot SHAKER mold\u003cbr\u003e\nSize: \u003cbr\u003e\n   - coffee pot - approx 1.5 in tall x 1.75 in wide\u003cbr\u003e\n   - entire palette approx 4.25 in tall x 3.5 in wide\u003cbr\u003e\nSilicone mold to make keychain or badge reel\u003cbr\u003e\nGift for coffee lover\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249911955591,"sku":null,"price":27.0,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249911988359,"sku":null,"price":27.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5848445366_l3rs.jpg?v=1759089156"},{"product_id":"silicone-shaker-mold-for-resin-plumeria-shaker-mold-1-5-inches","title":"SILICONE SHAKER MOLD for resin, plumeria shaker mold, 1.5 inches","description":"\u003cp\u003eThis listing is for SILICONE SHAKER MOLD for resin. \u003cbr\u003e\nDesign: plumeria flower\u003cbr\u003e\nSize: approx 1.5 in tall \u003cbr\u003e\nTo make gift for nurse, friend, coffee lover \u003cbr\u003e\nTo make keychain, badge reel, or magnet\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"transluscent","offer_id":43249912021127,"sku":null,"price":17.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249912053895,"sku":null,"price":17.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5309262389_mvz2.jpg?v=1759089157"},{"product_id":"silicone-mold-for-resin-trick-or-treat-frog-halloween-spooky-season-2-5-inches-gift-for-nurse-gift-for-teacher-earrings","title":"SILICONE MOLD for resin, trick or treat frog, halloween, spooky season, 2.5 inches, gift for nurse, gift for teacher. Earrings","description":"\u003cp\u003eThis listing is for a 2.5 inch halloweeng frog\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249913757831,"sku":null,"price":13.25,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249913790599,"sku":null,"price":13.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5204919771_j1hm.jpg?v=1759089168"},{"product_id":"silicone-mold-for-resin-mummy-frog-halloween-spooky-season-2-inches-gift-for-nurse-gift-for-teacher","title":"SILICONE MOLD for resin, mummy  frog,  halloween, spooky season, 2 inches, gift for nurse, gift for teacher","description":"\u003cp\u003eThis listing is for a 2 inch  halloween mummy frog  silicone mold\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249913823367,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249913856135,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5156671310_4acx.jpg?v=1759089167"},{"product_id":"silicone-mold-for-resin-flying-witch-frog-on-broomstick-halloween-spooky-season-2-5-inches-gift-for-nurse-gift-for-teacher","title":"SILICONE MOLD for resin, flying witch frog on broomstick, halloween, spooky season, 2.5 inches, gift for nurse, gift for teacher","description":"\u003cp\u003eThis listing is for a 2.5 inch wide, 2 inch tall halloween witch frog flying on a broomstick silicone mold\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249913921671,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249913954439,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5156681664_jn4e.jpg?v=1759089183"},{"product_id":"silicone-mold-for-resin-cute-bear-with-heart-handpoured-handmade-gift-for-crafter-resin-artist","title":"SILICONE MOLD for resin, cute bear with heart. Handpoured. Handmade gift for crafter, resin artist","description":"\u003cp\u003eThis listing is for a SILICONE MOLD for resin. \u003cbr\u003e\ndesign: cute sitting bear with heart \u003cbr\u003e\nsizes: \u003cbr\u003e\napprox 2 inch tall \/ 1.6 inch wide\u003cbr\u003e\nGift for crafter, resin artist\u003cbr\u003e\n*Check out my other silicone mold designs!\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249914708103,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249914740871,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6282610755_rbz1.jpg?v=1759089229"},{"product_id":"silicone-mold-for-resin-fall-earrings-leaf-with-pumpkin-spiced-latte-approx-mold-gift-for-crafter-resin-artist","title":"SILICONE MOLD for resin, fall earrings. Leaf with pumpkin spiced latte. approx. mold, gift for crafter, resin artist","description":"\u003cp\u003eThis listing is for a SILICONE MOLD for resin. \u003cbr\u003e\ndesign: fall leaf studs with hole, pumpkin spiced latte with hole. \u003cbr\u003e\napprox 1 inch flat latte cup plus hole, approx 0.5 inch leaf plus hole\u003cbr\u003e\nVersatile design where you can use one or both designs to create different earrings variations \u003cbr\u003e\nGift for crafter, resin artist\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249914773639,"sku":null,"price":13.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249914806407,"sku":null,"price":13.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6234388862_mogb.jpg?v=1759089226"},{"product_id":"silicone-mold-for-resin-s-cup-topper-silicone-mold-mold-to-make-flat-christmas-tree-cup-topper-20-30-oz-and-40-oz-christmas-gift","title":"SILICONE MOLD for resin. S cup topper silicone mold.  mold to make flat Christmas tree cup topper 20\/30 oz and 40 oz. Christmas gift.","description":"\u003cp\u003eThis is a SILICONE MOLD for resin. S cup topper silicone mold.  mold to make flat Christmas tree cup topper fits 20\/30 oz and 40 oz (S.tan.ley)\u003cbr\u003e\nMeasure your cup to ensure these will fit. We do not offer refunds or exchanges for wrong size\u003c\/p\u003e \n\n\u003cp\u003eAcrylic blank to make silicone mold is from Lilibellestudio.\u003c\/p\u003e \n\n\u003cp\u003eGift for mom, dad, sister, nurse, teacher\u003cbr\u003e\nChristmas\u003c\/p\u003e \n\n\u003cp\u003eSize: \u003cbr\u003e\n   - see pictures for size. fits a cup 20\/30 and 40 ounces\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249915428999,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249915461767,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6204916090_nxgj.jpg?v=1759089235"},{"product_id":"silicone-mold-for-resin-sweater-2-inch-flat-mold-sweatwr-weather-to-make-fall-badge-reel-gift-for-crafter-gift-for-resin-artist","title":"SILICONE MOLD for resin, sweater, 2 inch flat mold, sweatwr weather, to make fall badge reel, gift for crafter, gift for resin artist","description":"\u003cp\u003eThis listing is for a 2 inch silicone mold.\u003cbr\u003e\ndesign: sweater with heart print\u003cbr\u003e\nsize: 2 inches\u003cbr\u003e\ngift for crafter, resin artist\u003c\/p\u003e\n\n\u003cp\u003eNote that there are several mushroom designs in my shop. Check them out!\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249916215431,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249916248199,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5288881394_5r2e.jpg?v=1759089245"},{"product_id":"silicone-mold-for-resin-spooky-bear-grumpy-bear-mold-to-make-keychain-badge-reel-magnet-gift-for-nurse-teacher","title":"SILICONE MOLD for resin, spooky bear, grumpy bear, mold to make keychain badge reel magnet, gift for nurse teacher","description":"\u003cp\u003eThis listing is for SILICONE MOLD for resin. \u003cbr\u003e\nDesign: flat grumpy\/spooky bear\u003cbr\u003e\nSize: approx 2 in x 2 in\u003cbr\u003e\nTo make gift for nurse, friend, neighbor \u003cbr\u003e\nTo make keychain, badge reel, or magnet\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249916510343,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249916543111,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5182621360_j1dg.jpg?v=1759089266"},{"product_id":"silicone-mold-mini-leaf-mushroom-earring-studs-0-5-kawaii-nature-earrings-cottagecore-jewelry-handmade-gift-for-crafter-resin-art","title":"SILICONE MOLD Mini Leaf \u0026 Mushroom Earring Studs | 0.5” Kawaii Nature Earrings | Cottagecore Jewelry. Handmade gift for crafter, resin art","description":"\u003cp\u003eThis listing is for a SILICONE MOLD for resin. \u003cbr\u003e\ndesign: leaves and\/or mushrooms earring molds\u003cbr\u003e\nsize:  approx 0.5 inch tall,  1\/8 inch thick\u003cbr\u003e\nGift for crafter, resin artist\u003c\/p\u003e\n\n\u003cp\u003eAdd a touch of cozy woodland charm to your look with these tiny leaf + mushroom earring studs! Measuring just 0.5 inches, they’re the perfect subtle accessory for everyday wear or to complete your cottagecore, kawaii, or nature-inspired outfit.\u003c\/p\u003e\n\n\u003cp\u003eAvailable as a single pair or a bundle of 3, these earrings make a sweet gift for book lovers, cozy autumn fans, or anyone who loves a little nature magic.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent \/ 1","offer_id":43249917460615,"sku":null,"price":5.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ 2","offer_id":43249917493383,"sku":null,"price":5.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ 3","offer_id":43249917526151,"sku":null,"price":5.49,"currency_code":"USD","in_stock":true},{"title":"translucent \/ all 3 sets","offer_id":43249917558919,"sku":null,"price":5.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ 1","offer_id":43249917591687,"sku":null,"price":5.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ 2","offer_id":43249917624455,"sku":null,"price":5.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ 3","offer_id":43249917657223,"sku":null,"price":5.49,"currency_code":"USD","in_stock":true},{"title":"random color \/ all 3 sets","offer_id":43249917689991,"sku":null,"price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.7159186110_mmas.jpg?v=1759089275"},{"product_id":"silicone-mold-for-resin-cozy-bookstore-resin-shaker-mold-book-lover-silicone-mold-kawaii-resin-craft-2-5-inches","title":"SILICONE MOLD for resin, Cozy Bookstore Resin Shaker Mold | Book Lover Silicone Mold | Kawaii Resin Craft, 2.5 inches","description":"\u003cp\u003eThis listing is for a 2.5 inch silicone mold.\u003c\/p\u003e\n\n\u003cp\u003eCozy Bookstore Resin Shaker Mold | Book Lover Silicone Mold | Kawaii Cafe Book Resin Craft\u003c\/p\u003e\n\n\u003cp\u003eCreate the perfect cozy vibes with this Cozy Bookstore shaker mold! Featuring bookshelves, pumpkins, a cat, and café details, this mold is perfect for resin shakers, charms, bookmarks \u0026amp; keychains. A must-have for book lovers and kawaii crafters.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249917722759,"sku":null,"price":11.25,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249917755527,"sku":null,"price":11.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.7159165328_jq8g.jpg?v=1759089275"},{"product_id":"silicone-mold-for-resin-spooky-bookstore-resin-shaker-mold-halloween-book-silicone-mold-ghost-pumpkin-kawaii-resin-craft-2-5-inches","title":"SILICONE MOLD for resin, Spooky Bookstore Resin Shaker Mold | Halloween Book Silicone Mold | Ghost Pumpkin Kawaii Resin Craft, 2.5 inches","description":"\u003cp\u003eThis listing is for a 2.5 inch silicone mold.\u003c\/p\u003e\n\n\u003cp\u003eAdd some spooky-cute charm to your resin creations! This Spooky Bookstore shaker mold features a ghost, pumpkins, bookshelves \u0026amp; cobwebs — perfect for Halloween, book lovers, and kawaii resin crafts. Great for charms, keychains, bookmarks \u0026amp; ornaments.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249917788295,"sku":null,"price":11.25,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249917821063,"sku":null,"price":11.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.7207136955_c7pj.jpg?v=1759089277"},{"product_id":"silicone-shaker-mold-for-resin-book-shaker-mold-approx-1-8-inches","title":"silicone SHAKER mold for resin, book shaker mold, approx 1.8 inches","description":"\u003cp\u003eThis listing is for a 1.8 inch ish book shaker silicone mold\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003eBring your love for books to life with this adorable shaker mold! Designed in the shape of a storybook, this mold features the words “Cozy Book Lover” on the cover, making it the perfect craft supply for readers, writers, and bookish creators.\u003c\/p\u003e\n\n\u003cp\u003eUse it to create resin shakers, keychains, ornaments that celebrate your bookworm side. Add glitter, sequins, clay slices, or other inclusions to make each piece uniquely yours!\u003c\/p\u003e\n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249917853831,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249917886599,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.7159116950_a068.jpg?v=1759089278"},{"product_id":"silicone-mold-for-resin-kawaii-drink-coffee-tea-smoothie-or-boba-flat-silicone-mold-gift-for-coffee-boba-tea-lover","title":"SILICONE MOLD for resin. Kawaii drink: coffee, tea, smoothie or boba. flat silicone mold. Gift for coffee, boba, tea lover","description":"\u003cp\u003eThis listing is for either a \u003cbr\u003e\n2.5 inch kawaii drink FLAT silicone mold\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent \/ 2.5 inch","offer_id":43249918115975,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ 2.5 inch","offer_id":43249918148743,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6118111167_irne.jpg?v=1759089280"},{"product_id":"silicone-mold-for-resin-woodland-animal-squirrel-chipmunk-with-acorn-and-mushroom-2-inches-gift-for-nurse-or-teacher","title":"SILICONE MOLD for resin, woodland animal, squirrel, chipmunk with acorn and mushroom, 2 inches, gift for nurse or teacher","description":"\u003cp\u003eThis listing is for a 2 inch silicone mold.\u003cbr\u003e\ndesign: squirrel\/chipmunk\/woodland animal with acorn and mushroom\u003cbr\u003e\nsize: 2 inches\u003cbr\u003e\ngift for nurse or teacher\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249918378119,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249918410887,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5333608285_ndnf.jpg?v=1759089284"},{"product_id":"silicone-mold-for-resin-flat-christmas-tree-design-2-x-1-75-in-mold-to-make-keychain-badge-reel-magnet-gift-for-nurse-teacher-neighbor","title":"SILICONE MOLD for resin, flat Christmas tree design, 2 x 1.75 in, mold to make keychain badge reel magnet, gift for nurse teacher neighbor","description":"\u003cp\u003eThis listing is for SILICONE MOLD for resin. \u003cbr\u003e\nDesign: flat christmas tree\u003cbr\u003e\nSize: approx 2 in wide x 1.75 in tall\u003cbr\u003e\nTo make gift for nurse, friend, neighbor \u003cbr\u003e\nTo make keychain, badge reel, or magnet\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249918443655,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249918476423,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5182574120_4yzh.jpg?v=1759089285"},{"product_id":"silicone-mold-for-bookmark-approx-5-25-inch-tall-mold-frog-mushroom-woodland-cottage-core-aesthetic-gift-for-crafter-resin-artist","title":"SILICONE MOLD for bookmark. approx. 5.25 inch tall mold. Frog, mushroom. Woodland, cottage core aesthetic. gift for crafter, resin artist","description":"\u003cp\u003eThis listing is for a SILICONE MOLD for resin. \u003cbr\u003e\ndesign: frog and mushroom bookmark\u003cbr\u003e\napprox 5.25 inch x 1.5 inch x 1\/8 inch thickness with hole for tassel or ribbon.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249920376967,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249920409735,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6282456847_oh9q.jpg?v=1759089295"},{"product_id":"silicone-mold-for-resin-shark-shaker-or-flat-silicone-mold-2-2-5-inches-to-make-resin-art-or-shaker-charm-keychain-gift-for-resin-artist","title":"SILICONE MOLD for resin, shark shaker or flat silicone mold, 2-2.5 inches, to make resin art or shaker charm keychain. Gift for resin artist","description":"\u003cp\u003eThis listing is for SILICONE MOLD for resin, \u003cbr\u003e\ndesign: shark\u003cbr\u003e\nsize:\u003cbr\u003e\n  shaker- approx 2.5 inches tall\u003cbr\u003e\n  flat- approx 2 inches tall\u003c\/p\u003e\n\n\u003cp\u003eYou can cast a resin shaker piece from the silicone mold!\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent \/ shaker and bits","offer_id":43249920508039,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"translucent \/ flat","offer_id":43249920540807,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"translucent \/ shaker","offer_id":43249920573575,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"translucent \/ bits","offer_id":43249920606343,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"translucent \/ body parts bits","offer_id":43249920639111,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"translucent \/ both flat and shaker","offer_id":43249920671879,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"translucent \/ shark 2\u0026quot; flat","offer_id":43249920704647,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"translucent \/ shark 2.5\u0026quot; shaker","offer_id":43249920737415,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ shaker and bits","offer_id":43249920770183,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ flat","offer_id":43249920802951,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ shaker","offer_id":43249920835719,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ bits","offer_id":43249920868487,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ body parts bits","offer_id":43249920901255,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ both flat and shaker","offer_id":43249920934023,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ shark 2\u0026quot; flat","offer_id":43249920966791,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ shark 2.5\u0026quot; shaker","offer_id":43249920999559,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6240577324_d06r.jpg?v=1759089299"},{"product_id":"silicone-mold-for-resin-kawaii-watermelon-peach-lemon-strawberry-teabag-approx-2-25x2-5-inch-flat-mold-gift-for-crafter-resin-artist","title":"SILICONE MOLD for resin, kawaii Watermelon, peach, lemon, strawberry teabag. approx 2.25x2.5 inch flat mold, gift for crafter, resin artist","description":"\u003cp\u003eThis listing is for a SILICONE MOLD for resin. \u003cbr\u003e\ndesign: kawaii Watermelon, peach, lemon, strawberry teabag\u003cbr\u003e\napprox 2.5 x 2.25 inch flat mold \u003cbr\u003e\nGift for crafter, resin artist\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent \/ lemon","offer_id":43249921097863,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"translucent \/ peach","offer_id":43249921130631,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"translucent \/ strawberry","offer_id":43249921163399,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"translucent \/ watermelon","offer_id":43249921196167,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"translucent \/ palette-all 4designs","offer_id":43249921228935,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ lemon","offer_id":43249921261703,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ peach","offer_id":43249921294471,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ strawberry","offer_id":43249921327239,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ watermelon","offer_id":43249921360007,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ palette-all 4designs","offer_id":43249921392775,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6366295574_dpb1.jpg?v=1759089302"},{"product_id":"silicone-mold-for-resin-dim-sum-dumpling-flat-or-shaker-mold-to-make-badge-reel-keychain-magnet-gift-for-dim-sum-lover-foodie","title":"SILICONE MOLD for resin, dim sum dumpling (flat or shaker) mold to make badge reel, keychain, magnet. gift for dim sum lover, foodie","description":"\u003cp\u003eThis is an EXCLUSIVE \/ CUSTOM DESIGN for Buddha Buddies Designs! \u003cbr\u003e\nThis listing is for SILICONE MOLD (FLAT OR SHAKER) for resin. \u003cbr\u003e\nDesign:  dim sum \/ dumpling FLAT or SHAKER mold (simple). If you would like a similar design with \"cheek blush,\" please search for blushing dumpling.\u003cbr\u003e\nSize:  approximately 1.5 inch\u003cbr\u003e\nSILICONE MOLD for resin, dim sum dumpling (flat or shaker) mold to make badge reel, keychain, magnet. gift for dim sum lover, foodie\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent \/ flat","offer_id":43249921523847,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true},{"title":"translucent \/ shaker","offer_id":43249921556615,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ flat","offer_id":43249921589383,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true},{"title":"random color \/ shaker","offer_id":43249921622151,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6770596446_9uux.jpg?v=1759089305"},{"product_id":"silicone-mold-for-resin-holiday-cat-sitting-on-chair-christmas-ornament-christmas-gift-for-mom-dad-cat-lover-best-friend","title":"SILICONE MOLD for resin, holiday cat sitting on chair.  Christmas ornament.Christmas gift for mom, dad, cat lover, best friend","description":"\u003cp\u003eThis listing is for SILICONE MOLD for resin. Finished \/ casted resin pieces are shown to illustrate what can be created from the SILICONE MOLD\u003c\/p\u003e \n\n\u003cp\u003eDesign: LAYERED cat sitting on recliner chair with x4 cat designs\u003cbr\u003e\nSize: \u003cbr\u003e\n   - finished layered chair\/recliner measures approximately 2 7\/8\" wide x 3\/8\" tall\u003cbr\u003e\n   - cats fit in the couch slot: \u003cbr\u003e\nSilicone mold to make a christmas ornament\u003cbr\u003e\nGift for Mom, Dad, Grandma, Grandpa, Aunt, Uncle, Friend, Coworker, cat lover\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD PALETTE ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249921654919,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249921687687,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.6762523953_to92.jpg?v=1759089306"},{"product_id":"silicone-mold-for-resin-koi-pond-with-sakura-flat-to-make-badge-reel-keychain-chinese-new-year-lunar-new-year-japanese","title":"SILICONE MOLD for resin, koi pond with sakura, flat to make badge reel, keychain, chinese new year, lunar new year, japanese","description":"\u003cp\u003eThis listing is for SILICONE *FLAT* MOLD for resin. \u003cbr\u003e\nDesign: koi pond with sakura design\u003cbr\u003e\nApproximately 1.75 inches wide, 1.75 inches tall\u003c\/p\u003e\n\n\u003cp\u003eSilicone mold to make keychain, badge reel, magnet\u003cbr\u003e\nGift for chinese new year.\u003c\/p\u003e \n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249921720455,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249921753223,"sku":null,"price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5704944511_s5wf.jpg?v=1759089308"},{"product_id":"silicone-mold-for-resin-ramen-flat-mold-to-make-badge-reel-keychain-magnet-approximately-2-inch-gift-for-ramen-lover-foodie","title":"SILICONE MOLD for resin, ramen FLAT mold to make badge reel, keychain, magnet. approximately 2 inch, gift for ramen lover, foodie","description":"\u003cp\u003eThis is an EXCLUSIVE \/ CUSTOM DESIGN for Buddha Buddies Designs! \u003cbr\u003e\nThis listing is for SILICONE *FLAT* MOLD for resin. \u003cbr\u003e\nDesign: ramen FLAT mold\u003cbr\u003e\nSize:  approximately 2 inch\u003cbr\u003e\nRamen FLAT silicone mold to make badge reel, keychain, magnet. approximately 2 inch, gift for ramen lover, foodie\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249921785991,"sku":null,"price":18.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249921818759,"sku":null,"price":18.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5704641494_ngfu.jpg?v=1759089309"},{"product_id":"silicone-mold-for-resin-ramen-shaker-mold-to-make-keychain-approximately-2-inch-gift-for-ramen-lover-foodie-noodles-exclusive-design","title":"SILICONE MOLD for resin, ramen SHAKER mold to make keychain, approximately 2 inch, gift for ramen lover, foodie, noodles. Exclusive design.","description":"\u003cp\u003eThis is an EXCLUSIVE \/ CUSTOM DESIGN for Buddha Buddies Designs! \u003cbr\u003e\nThis listing is for SILICONE *SHAKER* MOLD for resin. \u003cbr\u003e\nDesign:  ramen SHAKER mold\u003cbr\u003e\nSize: \u003cbr\u003e\n   - ramen bowl is approximately 2 inch\u003cbr\u003e\n   - various bits for you to choose to fill shaker cavity with \u003cbr\u003e\nRamen SHAKER silicone mold to make keychain, approximately 2 inch, gift for  ramen lover, foodie, noodles, udon, saimin\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249921851527,"sku":null,"price":23.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249921884295,"sku":null,"price":23.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5704643606_hdvt.jpg?v=1759089310"},{"product_id":"silicone-mold-for-resin-dim-sum-bao-dumpling-shaker-mold-to-make-keychain-2-inch-gift-for-dim-sum-lover-foodie-exclusive-shop-design","title":"SILICONE MOLD for resin, dim sum bao dumpling SHAKER mold to make keychain, 2 inch, gift for dim sum lover, foodie. Exclusive shop design!","description":"\u003cp\u003eThis is an EXCLUSIVE \/ CUSTOM DESIGN for Buddha Buddies Designs! \u003cbr\u003e\nThis listing is for SILICONE *SHAKER* MOLD for resin. \u003cbr\u003e\n Design:  dim sum SHAKER mold\u003cbr\u003e\nSize: \u003cbr\u003e\n   - dim sum steamer basket approximately 2 inch\u003cbr\u003e\n   - various bits for you to choose to fill shaker cavity with \u003cbr\u003e\ndim sum shaker SHAKER silicone mold to make keychain, approximately 2 inch, gift for dim sum lover, foodie\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for ONE SILICONE MOLD ONLY. The photos may show an acrylic blank(s) to show the detail of the mold design, but the listing\/purchase is only for the silicone mold.\u003c\/p\u003e \n\n\u003cp\u003ePlease inspect your mold prior to first use. I do not accept returns\/exchanges but you may message me any concerns you may have.\u003c\/p\u003e \n\n\u003cp\u003eMolds are HANDMADE by me and there may be small imperfections that will not affect the final casting made from the molds. Color of silicone will vary. Doming may be necessary to give your resin art a finished look. Molds may be hand trimmed on the top and bottom to remove excess silicone so there may be SLIGHT IMPERFECTIONS to the silicone mold edge. However, this will not affect the mold areas that are casted. The silicone mold is flexible for crafting designed for use with resin or epoxy. UV RESIN may be used with the TRANSLUCENT molds, but may shorten the lifespan of the mold and results may vary as UV resin may not cure properly with deeper molds such as shaker molds. This mold is not for use in ovens and is not food safe.\u003c\/p\u003e \n\n\u003cp\u003eDo not use a torch on your mold when attempting to pop bubbles in the resin. Instead, let your resin sit for a few minutes so that the bubbles can rise and lightly mist alcohol over the resin to pop bubbles.  EXTREME HEAT SUCH AS FROM A TORCH\/HEAT GUN WILL DAMAGE YOUR MOLD.\u003c\/p\u003e  \n\n\u003cp\u003eCARING FOR YOUR MOLD: Clean with warm soapy water (mild dish soap). Pat dry with a soft microfiber cloth (paper towels\/napkins may scratch the mold) then let air dry. Never use any abrasive soap or cleaning pads on the mold. When storing molds, lay the silicone mold flat, protect from dust, and keep out of direct sunlight.\u003c\/p\u003e\n\n\u003cp\u003eResin FYI: Resin\/epoxy can be harmful\/toxic. PROPER SAFETY PROTOCOLS must be followed when preparing, mixing, and casting resin. Refer to the resin brand you use for safety instructions. Work in a well-ventilated area, wear gloves, wear eye protection, wear a respirator.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"translucent","offer_id":43249921917063,"sku":null,"price":23.49,"currency_code":"USD","in_stock":true},{"title":"random color","offer_id":43249921949831,"sku":null,"price":23.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/files\/il_fullxfull.5752647731_rp42.jpg?v=1759089315"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/7764\/5447\/collections\/IMG_20240424_223227.jpg?v=1735713209","url":"https:\/\/buddhabuddiesdesigns.com\/collections\/silicone-molds.oembed","provider":"Buddha Buddies Designs","version":"1.0","type":"link"}